Git 2.13.0 • Manual
Home • Environment Variables •
git-remote (draft)
NAME
git-remote - Manage set of tracked repositories
SYNOPSIS
git remote [-v | --verbose]
git remote add [-t <branch>] [-m <master>] [-f] [--[no-]tags] [--mirror=<fetch|push>] <name> <url>
git remote rename <old> <new>
git remote remove <name>
git remote set-head <name> (-a | --auto | -d | --delete | <branch>)
git remote set-branches [--add] <name> <branch>...
git remote get-url [--push] [--all] <name>
git remote set-url [--push] <name> <newurl> [<oldurl>]
git remote set-url --add [--push] <name> <newurl>
git remote set-url --delete [--push] <name> <url>
git remote [-v | --verbose] show [-n] <name>...
git remote prune [-n | --dry-run] <name>...
git remote [-v | --verbose] update [-p | --prune] [(<group> | <remote>)...]
DESCRIPTION
Manage the set of repositories (“remotes”) whose branches you track.
OPTIONS
-v
;--verbose
-
Be a little more verbose and show remote url after name. NOTE: This must be placed between
remote
andsubcommand
.
COMMANDS
With no arguments, shows a list of existing remotes. Several subcommands are available to perform operations on the remotes.
add
-
Adds a remote named <name> for the repository at <url>. The command
git fetch <name>
can then be used to create and update remote-tracking branches <name>/<branch>.With
-f
option,git fetch <name>
is run immediately after the remote information is set up.With
--tags
option,git fetch <name>
imports every tag from the remote repository.With
--no-tags
option,git fetch <name>
does not import tags from the remote repository.By default, only tags on fetched branches are imported (see linkgit:git-fetch[1]).
With
-t <branch>
option, instead of the default glob refspec for the remote to track all branches under therefs/remotes/<name>/
namespace, a refspec to track only<branch>
is created. You can give more than one-t <branch>
to track multiple branches without grabbing all branches.With
-m <master>
option, a symbolic-refrefs/remotes/<name>/HEAD
is set up to point at remote’s<master>
branch. See also the set-head command.When a fetch mirror is created with
--mirror=fetch
, the refs will not be stored in the refs/remotes/ namespace, but rather everything in refs/ on the remote will be directly mirrored into refs/ in the local repository. This option only makes sense in bare repositories, because a fetch would overwrite any local commits.When a push mirror is created with
--mirror=push
, thengit push
will always behave as if--mirror
was passed. rename
-
Rename the remote named <old> to <new>. All remote-tracking branches and configuration settings for the remote are updated.
In case <old> and <new> are the same, and <old> is a file under
$GIT_DIR/remotes
or$GIT_DIR/branches
, the remote is converted to the configuration file format. remove
;rm
-
Remove the remote named <name>. All remote-tracking branches and configuration settings for the remote are removed.
set-head
-
Sets or deletes the default branch (i.e. the target of the symbolic-ref
refs/remotes/<name>/HEAD
) for the named remote. Having a default branch for a remote is not required, but allows the name of the remote to be specified in lieu of a specific branch. For example, if the default branch fororigin
is set tomaster
, thenorigin
may be specified wherever you would normally specifyorigin/master
.With
-d
or--delete
, the symbolic refrefs/remotes/<name>/HEAD
is deleted.With
-a
or--auto
, the remote is queried to determine itsHEAD
, then the symbolic-refrefs/remotes/<name>/HEAD
is set to the same branch. e.g., if the remoteHEAD
is pointed atnext
, “git remote set-head origin -a
” will set the symbolic-refrefs/remotes/origin/HEAD
torefs/remotes/origin/next
. This will only work ifrefs/remotes/origin/next
already exists; if not it must be fetched first.Use
<branch>
to set the symbolic-refrefs/remotes/<name>/HEAD
explicitly. e.g., “git remote set-head origin master” will set the symbolic-refrefs/remotes/origin/HEAD
torefs/remotes/origin/master
. This will only work ifrefs/remotes/origin/master
already exists; if not it must be fetched first. set-branches
-
Changes the list of branches tracked by the named remote. This can be used to track a subset of the available remote branches after the initial setup for a remote.
The named branches will be interpreted as if specified with the
-t
option on the git remote add command line.With
--add
, instead of replacing the list of currently tracked branches, adds to that list. get-url
-
Retrieves the URLs for a remote. Configurations for
insteadOf
andpushInsteadOf
are expanded here. By default, only the first URL is listed.With
--push
, push URLs are queried rather than fetch URLs.With
--all
, all URLs for the remote will be listed. set-url
-
Changes URLs for the remote. Sets first URL for remote <name> that matches regex <oldurl> (first URL if no <oldurl> is given) to <newurl>. If <oldurl> doesn’t match any URL, an error occurs and nothing is changed.
With
--push
, push URLs are manipulated instead of fetch URLs.With
--add
, instead of changing existing URLs, new URL is added.With
--delete
, instead of changing existing URLs, all URLs matching regex <url> are deleted for remote <name>. Trying to delete all non-push URLs is an error.Note that the push URL and the fetch URL, even though they can be set differently, must still refer to the same place. What you pushed to the push URL should be what you would see if you immediately fetched from the fetch URL. If you are trying to fetch from one place (e.g. your upstream) and push to another (e.g. your publishing repository), use two separate remotes.
show
-
Gives some information about the remote <name>.
With
-n
option, the remote heads are not queried first withgit ls-remote <name>
; cached information is used instead. prune
-
Deletes all stale remote-tracking branches under <name>. These stale branches have already been removed from the remote repository referenced by <name>, but are still locally available in “remotes/<name>”.
With
--dry-run
option, report what branches will be pruned, but do not actually prune them. update
-
Fetch updates for a named set of remotes in the repository as defined by remotes.<group>. If a named group is not specified on the command line, the configuration parameter remotes.default will be used; if remotes.default is not defined, all remotes which do not have the configuration parameter remote.<name>.skipDefaultUpdate set to true will be updated. (See linkgit:git-config[1]).
With
--prune
option, prune all the remotes that are updated.
DISCUSSION
The remote configuration is achieved using the remote.origin.url
and remote.origin.fetch
configuration variables. (See linkgit:git-config[1]).
Examples
-
Add a new remote, fetch, and check out a branch from it
$ git remote origin $ git branch -r origin/HEAD -> origin/master origin/master $ git remote add staging git://git.kernel.org/.../gregkh/staging.git $ git remote origin staging $ git fetch staging ... From git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging * [new branch] master -> staging/master * [new branch] staging-linus -> staging/staging-linus * [new branch] staging-next -> staging/staging-next $ git branch -r origin/HEAD -> origin/master origin/master staging/master staging/staging-linus staging/staging-next $ git checkout -b staging staging/master ...
-
Imitate git clone but track only selected branches
$ mkdir project.git $ cd project.git $ git init $ git remote add -f -t master -m master origin git://example.com/git.git/ $ git merge origin
SEE ALSO
linkgit:git-fetch[1] linkgit:git-branch[1] linkgit:git-config[1]
GIT
Part of the linkgit:git[1] suite